Xh-28-D1X2-U Optical Switch Equipment Low Insertion Loss

XH-28-D1X2-U optical switch equipment
Features

(1) It has the characteristics of low insertion loss and fast switching speed.

(2)It can be controlled by RJ45 Ethernet or RS-232 serial port command.

(3)28 independent control optical switch buttons, easy to operate.

(4)Two different colors of LED display lights, showing the status of the light path.

(5) Equipment power supply supports AC: 85~265V AC power supply.

Performance
 

Panel description
 

Front panel

(1)RJ45 Ethernet interface, RS-232 serial port: Communication interface for equipment monitoring data information.

(2)ON/OFF:AC-220V power switch.

(3)1-28 buttons: 28 optical switch control buttons.

(4) Whole station/single bay: The green light indicates that the light path is working in the whole station, and the red light means that the light path is working in a single bay.

Right panel

Rear panel

(1)AC:85~265V:AC 22V power interface.

(2)1~28, 1-1~28-1, 1-2~28-2: optical fiber input or output ports; when the device is initially powered on, the optical path status is U row 1~28 U row 1-2~28-2 port, 1~28 of D row, 1-2~28-2 of D row, the indicator light is red; when the button is pressed, the light path indicator light turns green, and the optical path status is 1~28 of U row U row 1- 1~28-1 port, 1~28 of row D is connected to 1-1~28-1 of row D.

Factory settings:

The serial port settings are: 9600 baud, 8 data bits, 1 stop bit, no parity.

IP address: 192.168.1.100; communication port: 5000

Network port protocol type: TCP Server (server), UDP (fixed port: 18888)

Note: Unless the user has special requirements.

Ordering Information: XH-28-D1x2-U-A-B-C-D-E
 

*If there are other different requirements, the equipment can be customized